Clear the area of debris, rocks, and building materials, then grade the site to ensure proper drainage. Till the existing soil at least 2 inches deep and add quality topsoil as needed for a total depth of 4–6 inches.
For best results, test the soil for pH and nutrients, making any recommended adjustments before installation. Finish by grading and rolling the area to create a smooth, firm, and even surface ready for sod.

Use a tape measure to determine the area of your planned lawn. Measure the area’s shape minus any landscaping features (trees, flowerbeds, patios, sidewalks, etc.) to get the total square footage. Divide by 450 sq.ft., the size of one pallet, to determine how many pallets you will need. Call us at 281-375-7505 if you need help.
Schedule your turfgrass delivery after you have completed your soil and site prep and are ready to install the turfgrass. Prompt installation on the day of delivery is crucial.

Prior to installing your turfgrass sod, moisten the soil and install your lawn immediately upon delivery. In hot weather, protect unlaid turf by placing the blocks in the shade. If possible, cover with a moist cloth, or lightly water the unprotected turf. Begin installing turf along the longest straight line, such as a driveway, sidewalk or patio. Butt edges and ends against each other tightly, without stretching. Avoid gaps or overlaps. Stagger blocks in each row in a brick-like fashion, using a large sharp knife to trim corners, edges, etc. Avoid leasing small strips at outer edges as they will not retain moisture. On slopes, place the turf blocks so they run across the slope rather than up and down the slope.
To prevent indentations or air pockets avoid repeated walking or kneeling on the turf while it is being installed or just after watering.
After installing the turfgrass, roll the entire area to improve turfgrass/soil contact and remove air pockets.

Give your new lawn at least 1 inch of water within a half hour of installation. Water daily or more often, keeping turf moist until it is firmly rooted (about 2 weeks). Then less frequent and deeper watering should begin.
Weather conditions will dictate the amount and frequency of watering. Be certain that your new lawn has enough moisture to survive hot, dry, or windy periods. Water areas near buildings more often where reflected heat dries turfgrass.

During the first few weeks, avoid heavy or concentrated use of your new lawn. This gives the roots an opportunity to grow into the soil and ensures the turf will remain smooth.